Fluke 807-0115 manual T1 CSU/DSU ASE

Visual UpTime Select

ASE model 807-0109

T1 CSU/DSU ASE

W i t h D S X - 1 , D r o p - a n d - I n s e r t c a p a b i l i t i e s

Key features

•Inband management capabilities

•Multi-Protocol or IP Transport software

•Service Level Agreement (SLA) metrics

•Drop-and-Insert capabilities through DSX port

•Voice over IP (VoIP) analysis capability

•Application analysis capability

•LMI spoofing

•LAN management port

•Power loss detection

•Realtime events

The Visual UpTime® Select™ T1 CSU/DSU ASE is deployed on a T1 access line at the demarcation point between the provider network and customer premises. It supports full and fractional (FT1) T1 networks and provides connectivity through V.35 and additional digital cross connect signal (DSX-1) interfaces.

The ASE supports Multi-Protocol software for deploy- ment in standard frame relay or HDLC networks and IP Transport software for deployment in frame relay or HDLC-based networks that use IP switching.

T1 CSU/DSU model 807-0109 front view

T1 CSU/DSU model 807-0109 rear view

In addition to performing standard CSU/DSU functions—such as BER tests, loopbacks, and power failure detection—the ASE is capable of inserting management traffic.

The ASE’s “drop-and-insert” feature provides a secondary DSX-1 port that can connect to a Private Branch Exchange at a customer’s site. T1 Timeslots can be segmented for a PBX on the same circuit car- rying data traffic (see figure).

		CSU/DSU
	T1 Access	ASE	V.35
Wide Area	Line		Line
Network
	PBX		Optional LAN	Visual
			Connection	UpTime
		PBX		Select
				Server
	TelephoneTelephone
T1 CSU/DSU model 807-0109 position on network

Technical Data