2.1.2 Defaults - Tables
The Tablestab (Figure 5) is disp layed when the File|Defaults menu option is
selected and the tab labeled Tablesis selected.
Enabled and disabled
All controls are enabled at all times.
Dialog information
The File|Defaults Tablestab determines the default settings to use when gener-
ating tables.
The “Export delimiter” allows the user to specify the delimiter used to separate
values when exporting a tableto an ASCII text file. The user may select either
a tab or a comma as the delimiter.
The “Starting page number” allows the user to select or enter a number for the
starting page number of the printed table. The starting page number must be be-
tween 1 and 10.
The “Font to use” allowsthe user to specify the font to use when printing the
table values. The list of fonts consistsof all fonts supported by the default
printer. The font size can also be selected. The allowablefont sizes are from 6
point to 12 point. A sample of the selected font isdisplayed below the font
selection.
9933 TableWare
User’s Guide
12
Figure 5 Defaults-Tables