Dialog information
The type of coefficient choices are:B, E, J, K, N, R, S, T, and Gold-Platinum.
The default is TypeK.
The temperature range is dependent on the thermocouple type. Thermocouple
Requirements are explained in Section3.7.5.
The Continue button displays the RawData dialog for Thermocouple
coefficients.
The Cancel button returns to the TableWare main display.
3.3 Raw data
The Raw Data dialog is formatted for either ITS-90, Polynomial, CVD,
IPTS-68, or Thermocouples depending on the type of coefficients selected.

3.3.1 ITS-90 coefficients

This Raw Data dialog (Figure 12) isdisplayed when the Continue button is se-
lected from the Platinum Probe Coefficients dialog and ITS-90 is selected as
the type of coefficients to calculate.
19
3 Coefficients menu
Raw data
Figure 12 Raw Data dialog for ITS-90 coefficients