Section 3.6, TableTemperature Range Chart. If the selected minimum and
maximum temperatures are too extreme, the algorithms used to calculate the ta-
ble values may not produce correct results. TableWare has been throughly
tested over the recommended temperatureranges and found to produce correct
results.
6.2 Table
Ware
Error Messages
Message “Anerror occurred while calculating coefficient type table values at
temperature.The algorithms us ed may not be able to solve for this value.
Changing the minimum or maximum temperature for the table may solvethis
problem.
[Error: error number -description]"
Remarks The minimum and/or maximum temperatures selected may exceed
the recommended minimum or maximum temperatures for generating the table.
The algorithms used to generate table values cannot alwayssolve for extreme
values. For recommended temperature ranges for generating tables, see Section
3.6, TableTemperature Range Chart.
Message “There was an error writing to the .INI file:
File: filename
Section: section
Entry: entry
Val u e : value
[Error: error number – description]”
Remarks Tabl eWar e wasnot able to write to the .INI file. The error num-
ber-description message givesan indication of the reason for this error
message.
Message “Allof the required data for coefficient type coefficients has not been
entered.
Reasons:
Reason 1
Reason 2
.
.
.
Reason n
Remarks The raw data entered by the user is not complete. Make sure allof
the required data has been entered according to the reasons listed.
9933 TableWare
User’s Guide
58