4 Table menu
The Tablemenu (Figure 29) provides options for generating Temperature vs.
Resistance, Temperaturevs. Ratio and Temperature vs. EMF tables based on
coefficients that can be entered manually.Selecting any one of the menu op-
tions displays the Probe Information dialog and then the appropriate Coeffi-
cient dialog as discussed in Sections 3.1 through 3.2. Selectingthe Continue
button on the coefficients dialog displays the Enter Coefficientsdialog.
Enabled and disabled
All options are enabled at all times.

4.1 Enter coefficients

The Enter Coefficientsdialog (Figure 30) is formatted for either ITS-90,
IPTS-68, CVD, Polynomial or Thermocouples depending on the type of coeffi-
cients selected.
Enabled and disabled
The OK button is disabled until coefficients have been entered into all required
boxes.
51
4 Table menu
Enter coefficients
Figure 29 Table menu
Figure 30 Enter Coefficients dialog for ITS-90 coefficients