ton is selected on the Coefficientsand Residuals dialog or when the OK button
is selected on the Enter Coefficients dialog.
Enabled and disabled
Controls on the Resolutions tab are disabled unless the “Use custom resolu-
tions” option is selected.
Dialog information
The TableOption s dialog allowsth e user to set parameters for generating a ta-
ble by selecting any of the three tabs;Type and Range, Resolutions, and Other
Settings. The Typeand Range tab is for selecting the type of table, temperature
scale, range of temperatures and step size. The Resolutions tab is for specifying
decimal settings for temperature, calculated values, and other resolutions. The
Other Settings tab is for setting the export delimiter,starting page number, font
and font size.
The Export button writes theidentifying information that was entered on the
Probe Information dialog, coefficient type, table type and table data to an
ASCII text file. The table data is separated by the delimiter specified on the
Other Settings tab.
The Print Tablebutton generates and prints the table to the default printer.
When you select the Print Tablebutton, your ranges are checked against the Ta-
ble TemperatureRanges chart (see Section 3.6). If your selected temperatures
exceed the values on the table, a warningmessage is displayed stating that val-
ues beyond the table values willbe extrapolated.
If the “Prompt to enter date that appears on report” check box on theFile|De-
faults General tab is checked, the Enter Date dialog (Figure 20) appears after
9933 TableWare
User’s Guide
32
Figure 22 Table Options dialog