FOCUS Enhancements MANL-1023-08 manual Features, Dvcprohd

Introduction

Features

The FS-100 offers the following features:

•Tapeless Acquisition

Especially equipped camcorders permit the use of Direct To Edit (DTE) Technology to record directly from a camcorder while shooting and without the need of a tape.

•True DTE Technology

When shooting is finished, connect the FS-100 to a computer and instantly be ready to edit in the timeline. Files are recorded to disk as

DVCPROHD and	DVCPRO/DV	DVCPRO/DV
DVCPRO50	RAW DV (.dv)	(NTSC Only)
P2	AVI TYPE 1 (.avi)	AVI Type 2 24p (.avi)
P2 PN	AVI Type 2 (.avi)	QuickTime 24p (.mov)
(DVCPROHD & 3.0 only)	Canopus AVI (.avi)
QUICKTIME (3.0 only)	Matrox AVI (.avi, .wav)
QUICKTIME PN	QuickTime (.mov)
(DVCPROHD & 3.0 only)	AVID OMF
RAW DV	Pinnacle (.avi, .wav)
	P2
	MXF OP1a

•Fast and Efficient Editing

When shooting is finished, mount the FS-100 to a Mac or PC editing system like a typical FireWire hard disk drive. Transfer clips to your NLE's media drive at up to 400 Mbps or edit instantly in real-time using the FS-100 as your media source. With some DV and P2 compatible NLE systems, it is necessary to capture the video footage using the NLE system’s capture capability.

•Confidence in Recording

Now, simultaneously record to disk and tape while you shoot, providing an immediately available, drop out free, edit source with an archive and backup on tape.

•Compact, Lightweight, Rugged Design

The FS-100 weighs approximately one pound including the battery and is only 1.5" thick. You can mount the FS-100 directly to your camcorder using the optional camera mount kit, or clip the FS-100 directly to your belt. The FS-100 is designed to withstand the rigors of field shooting. The programmable, seconds of electronic shock cache ensures that your video is always recorded even in the roughest of conditions.

FS-100 Portable DTE Recorder 3