FS-100 Functions

TC SET

TC SET

00 : 00 : 00 : 00

HH : MM : SS : FF

BACK

The Timecode Set parameter stores a user defined timecode in the FS-100’s non-volatile memory. This value is available for use by the FS-100 immediately after exiting TC SET.

TC FREE RUN

The FS-100 uses this value on the next recording after it is set in TC SET.

TC REGEN

This is the starting value when using an empty hard disk drive for recording.

TC REC RUN

This is the value used to begin every recording session after a power cycle.

FS-100 Portable DTE Recorder 62

Page 80
Image 80
FOCUS Enhancements MANL-1023-08 manual Tc Set, 00 00 00 HH MM SS FF