Using the FS-100 with a Computer

Mounting the FS-100 (Macintosh)

1.Start the Mac computer and connect the FS-100’s COMPUTER I/ O port to the computer using a standard 6-pin to 6-pin FireWire cable.

When mounted, the FS-100 should appear on the computer's desktop as shown below:

The FS-100 appears as a FAT32 volume with a PC label.

2.Locate the FS-100 on the desktop and open it up.

3.Open the folder with the most recent date code (for example, “20050127-110345-01”). It should look similar to the following:

Before Connecting FS-100 to a Computer

If clips have been assigned to a Reel folder: perform an Organize Reels before connecting the unit to a computer.

FS-100 Portable DTE Recorder 100

Page 118
Image 118
FOCUS Enhancements MANL-1023-08 manual Mounting the FS-100 Macintosh, Before Connecting FS-100 to a Computer