Quickstart

Connecting a FS-100 to a DV/HD Camcorder

Before performing this procedure, make sure you have installed and

charged the battery, see Installing / Removing the Battery Pack on page

22.

1.Connect the supplied Firewire cable to the DV I/O connector on the top of the FS-100.

2.Locate the FireWire/DV/iLink (or similar) connector on your video camera. It is located in different places depending upon the brand of camera. If you are unclear of its location, consult your video camera manual.

FS-100 Supplied with 4-pin to 6-pin FireWire Cable

A 4-pin to 6-pin FireWire, 1394, cable is provided with the

FS-100.

HVX200 FireWire Connector

The FireWire connector on the HVX200 is located on the right side of the camera, behind the tape transport. For more information, refer to the HVX200 documentation.

3.Connect the other end of the FireWire, 1394, cable to your video camera.

4.Turn on the video camera.

5.Turn on the FS-100.

FS-100 Portable DTE Recorder 25

Page 43
Image 43
FOCUS Enhancements MANL-1023-08 manual Connecting a FS-100 to a DV/HD Camcorder, HVX200 FireWire Connector