Fostex D2424LV manual Program, Time Base

When you format the hard disk one Program (*1) is automatically set up, and “ABS 00M 00S 00F” (ABS Time Base - *2) appears, indicating that the top of the Program is located.

Now, you can start recording, playback, and editing on this unit using the installed hard disk.

(*1) Program:

You can set up a maximum of 99 Programs, limited by the available space on your hard disk.

You can select any Program to perform recording, playback, and edit (Program Select function).

You may also name the Programs to facilitate managing individual songs (Program Title Edit function). You can delete unnecessary Programs (Program Delete function).

For more information, refer to the Reference Manual.

Model D2424LV Quick Operation Guide

•When ABS Time Base appears on the display, hold down the [SHIFT] key and press the [DISP SEL] key repeatedly to switch among these units.

ABS Time Base

																				ABS
																						M	S		F
																									PGM
OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

BAR/BEAT/CLK Time Base

BAR			PGM
OL	OL	BIT	24
0	0
3	3		FS
6	6
9	9		kHz
12	12		CLOCK
18	18
24	24		INT
30	30
42	42
∞	∞

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

(*2) Time Base:

This document and the Reference Manual use the word “Time Base” frequently. This refers to the units to indicate the current transport position of the recorder, in other words, Absolute Time.

This recorder also uses MTC (MIDI time code) and BAR/BEAT/CLK (bar/beat/clock). An MTC value is a relative time value calculated by adding an MTC offset value to the ABS time value. BAR/BEAT/CLK indicates a position within a song of this recorder’s tempo map based on the MIDI clock position pointer. You can switch to any of these units as follows.

For more information on the Time Base, refer to the Reference Manual.

MTC Time Base

																		MTC
																				H		M	S		F
																									PGM
OL																							OL	BIT	24
0																							0
3																							3		FS
6																							6
9																							9		kHz
12																							12		CLOCK
18																							18
24																							24		INT
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

Checking the available recording time (REMAIN) on a formatted disk

It is a good idea to check the available recording time after you format the disk. To do so, press the [DISP SEL] key to display the REMAIN time indication, which indicates the available recording time and recording space in the selected Time Base unit.

Press the [DISP SEL] key to return to the previous Time Base display.

<Note>

The REMAIN time values are based on a mono track recording. If you wish to record on multiple tracks, you can find out how many minutes of a song you can record by dividing the REMAIN time value by the number of tracks. Check the REMAIN value each time before you make a new recording.

Space remaining

																				H		M	S
OL																							OL
0																							0
3																							3
6																							6
9																							9
12																							12
18																							18
24																							24
30																							30
42																							42
∞																							∞
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24

	REMAIN
		Time remaining
BIT	24	When Bar/Beat/Clk is selected,
		you can see the remaining re-
	FS
		cording space in bar/beat/click.
	kHz
	CLOCK
	INT

11