Names and Functions(Front panel section)
EFFECT 1 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| TYPE |
|
| VARIATION |
MODE | SINGLE1/DUAL | SINGLE 2 | MODE | SINGLE1/DUAL | SINGLE 2 | F |
|
| 6 |
|
|
|
| ||||||
A | L.HALL | L.HALL | G | DELAY | DISTORTION | E | G | 5 | 7 |
B | S.HALL | S.HALL | H | MISC | G.MULTI 1 | D | H | 4 | 8 |
|
|
|
| ||||||
C | ROOM | ROOM | I | CHORUS | G.MULTI 2 | C | I | 3 | 9 |
D | PLATE | PLATE | J | PITCH | B.MULTI | B | J | 2 | 10 |
E | VOCAL | MIC SIM | K | FLANGER | VO.MULTI | A | K | 1 | 11 |
F | DELAY+REV | AMP SIM |
|
|
|
|
|
|
|
|
|
|
|
|
|
| PEAK |
|
|
1 2 3
ADJUST PARAM.1
4
EFFECT 2
| MIX |
|
| TYPE | VARIATION |
| ADJUST | MIX |
DRY+EFF |
|
|
|
|
| PARAM.2 | PARAM.3 | |
|
| DLY+REV | 6 |
| DRY+EFF | |||
| MODE | VOCAL | DELAY | 5 | 7 |
|
| |
| SINGLE2 | PLATE | MISC | 4 | 8 |
|
| |
| SINGLE1 | DUAL | ROOM | CHO | 3 | 9 |
| EFF MUTE |
|
|
|
|
| ||||
DRY | EFF |
| S.HALL | PITCH | 2 | 10 | DRY | EFF |
| L.HALL | FLANGE | 1 | 1 1 | ||||
|
|
|
|
| ||||
|
|
|
| PEAK |
|
|
| POWER |
5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 |
1.EFFECT 1 TYPE switch
Selects the type for EFFECT 1 in the dual mode or for the effect in the single (1 or 2) mode.
You can select from among 11 effect types for each mode as shown in the table below.
SW MODE SINGLE 1/DUAL | SINGLE 2 | SW MODE SINGLE 1/DUAL | SINGLE 2 | ||
A | L. HALL | L. HALL | G | DELAY | DISTORTION |
B | S. HALL | S. HALL | H | MISC | G. MULTI 1 |
C | ROOM | ROOM | I | CHORUS | G. MULTI 2 |
D | PLATE | PLATE | J | PITCH | B. MULTI |
E | VOCAL | MIC SIM | K | FLANGER | VO. MULTI |
F | DELAY + REV | AMP SIM |
|
|
|
2. EFFECT 1 PEAK indicator
Lights up when the input level of EFFECT 1 in the dual mode or of the effect in the single (1 or 2) mode exceeds "+6 dB" which is just below the clipping level.
9.EFFECT 2 VARIATION switch
Selects the variation for the effect type selected for EFFECT 2 in the dual mode.
This switch does not function in the single (1 or 2) mode. You can select from among 11 variations, as same as EFFECT 1.
10.EFFECT 2 ADJUST/PARAM. 2 control and indicator
Adjusts the parameter value for EFFECT 2 in the dual mode or the parameter 2 value for the effect in the single (1 or 2) mode.
The center position is the default. Turning left decreases the value while turning right increases the value.
11. EFFECT 2 MIX/PARAM. 3 control and indicator
Adjusts the balance of the output sound from the OUTPUT 2 jacks on the rear panel in the dual mode.
3.EFFECT 1 VARIATION switch
Selects the variation for EFFECT 1 in the dual mode or for the effect in the single (1 or 2) mode.
You can select from among 11 variations.
4.EFFECT 1 ADJUST/PARAM. 1 control and indicator
Adjusts the parameter value for EFFECT 1 in the dual mode or the parameter 1 value for the effect in the single (1 or 2) mode. The center position is the default. Turning left decreases the value while turning right increases the value.
5.EFFECT 1 MIX control
Adjusts the balance of the output sound from the OUTPUT 1 jacks on the rear panel in the dual or single mode.
• Hard left | :DRY 100%, EFFECT 0% |
• Center | :DRY 50%, EFFECT 0% |
• Hard right | :DRY 0%, EFFECT 100% |
6.MODE select switch
Selects the mode between DUAL, SINGLE 1 and SINGLE 2.
7.EFFECT 2 TYPE switch
Selects the type for EFFECT 2 in the dual mode. This switch does not function in the single (1 or 2) mode.
You can select from among 11 effect types, as same as EFFECT 1.
8.EFFECT 2 PEAK indicator
Lights up when the input level of EFFECT 2 in the dual mode exceeds "+6 dB" which is just below the clipping level. This indicator does not function in the single (1 or
2)mode. We recommend to adjust the INPUT LEVEL control on the rear panel appropriately so that this indicator sometimes lights up.
• Hard left | :DRY 100%, EFFECT 0% |
• Center | :DRY 50%, EFFECT 0% |
• Hard right | :DRY 0%, EFFECT 200% |
In the single mode, this control adjusts the parameter 3 value for the selected effect type. The center position is the default. Turning left decreases the value while turning right increases the value.
12. EFFECT MUTE switch and indicator
Each press of the switch alternates on and off of EFFECT MUTE. The indicator lights up when the mute is on, while it turns off when the mute is off.
Note that the dry sound is not muted regardless of the switch setting.
<NOTE>
When connecting an external foot switch and step- ping it down, pressing this switch does not alternate on and off of EFFECT MUTE.
13. POWER switch and indicator
Turns the power on or off. The indicator lights up when the power is on.
<Hints: About the ADJUST indicators for parameters>
Each ADJUST indicator lights when moving the appro- priate control after changing the effect type or varia- tion. This shows that the current position of the con- trol matches the parameter value.
On the contrary, if you change the effect type or varia- tion while the indicator is lit, it turns off. This the pa- rameter is set to the default value.
16
