Names and Functions (Rear panel section)
FOOT SW | R | L | R | L |
model 8051 |
| (MONO) |
| (MONO) |
EFF MUTE | OUTPUT 2 | OUTPUT 1 |
2 | DUAL MODE |
|
| 1 (1&2) | |
R | SINGLE MODE |
|
| L(MONO) | |
|
|
|
| TRIM | |
|
|
|
| LINE MIC/G | |
MIN | MAX | MIN | MAX | MIC | |
GUITAR | |||||
|
|
|
| ||
| LINE INPUT |
|
| MIC/GUITAR INPUT |
1 | 2 | 3 | 4 |
1.Power cord
2.FOOT SW jack
By connecting the optional Model 8051 foot switch to this jack, you can alternate on or off of the EFFECT MUTE function via the foot switch.
Contact our dealer or local Fostex sales office if you want to know details about the Model 8051.
3. OUTPUT 2 jacks (L (MONO), R)
In the dual mode, these jacks feed the EFFECT 2 sound in stereo (L and R). In the single mode (1 or 2), they do not feed any signal. When only the "L (MONO)" jack is plugged, it feeds the summed signal of L and R.
5 | 6 | 7 | 8 |
6.LINE INPUT 1 jack and Input level control
This jack connects to a line level
It is active when the input select switch is set to "LINE".
In the dual mode, the source signal is routed to EFFECT 1. When the INPUT 2 (R) jack is not plugged, the same signal is fed to both EFFECT 1 and EFFECT 2. You can adjust the input level by the control beside the jack while monitoring the appropriate peak indicator.
In the single mode, the source signal is routed to the L channel of the effect. When the INPUT 2 (R) jack is not plugged, the same signal is fed to both the L and R channels of the effect.
You can adjust the input level by the input level control beside the jack while monitoring the appropriate peak indicator.
<NOTE>
When the input select switch is set to "MIC/G", this jack is not active.
7.Input select switch
Selects the input jack to be active for INPUT 1.
LINE | The LINE INPUT jack is active. You can con- | |
nect a line level source. | ||
| ||
|
| |
MIC/G | The MIC/GUITAR INPUT jack is active. You can | |
connect a microphone or guitar directly. | ||
| ||
|
|
4.OUTPUT 1 jacks (L (MONO), R)
In the dual mode, these jacks feed the EFFECT 1 sound in stereo (L and R). In the single mode, they feed the selected effect sound in stereo (L and R). When only the "L (MONO)" jack is plugged, it feeds the summed signal of L and R.
5.LINE INPUT 2 jack/Input level control
This jack is used to connect to a line level
In the single mode, the source signal is routed to the R channel of the effect.
You can adjust the input level by the input level control beside the jack while monitoring the appropriate peak indicator.
8.MIC/GUITAR INPUT jack and TRIM control
This jack is used to connect to a microphone or guitar. It is active when the input select switch is set to "MIC/G".
In the dual mode, the source signal is routed to EFFECT 1. When the INPUT 2 (R) jack is not plugged, the same signal is fed to both EFFECT 1 and EFFECT 2. You can adjust the input level by the control beside the jack while monitoring the appropriate peak indicator.
In the single mode, the source signal is routed to the L channel of the effect. When the INPUT 2 (R) jack is not plugged, the same signal is fed to both the L and R channels of the effect.
You can adjust the input level by the TRIM control beside the jack while monitoring the appropriate peak indicator.
<NOTE>
When the input select switch is set to "LINE", this jack is not active.
17
