Fostex VF-16 <Hint 1>

<About save error>

If an error occurs for some reason during the

save operation, the error message as below

appears.

If it appears, press the [EXIT/NO] key.

The display returns to the previous screen

before performing the save operation.

Note that saved data before the error message

appears is all invalid.

<Note for saving data to more than one disc>

If you save data to more than one disc, we recom-

mend to put a number on each disc in the saving

order (such as

DISC-1

DISC-2

, etc.) so that you will

easily know the order for inserting discs when load-

ing data.

<Hint 1>

In the description for saving data above, we

assume to use a non-recorded CD-RW disc.

If you use a recorded disc (including a disc

on which computer data is recorded), also

note the following.

By performing step 4 in the save operation

procedure shown above ("While "SCSI" is

flashing, press the [ENTER/YES] key.") when

a recorded disc is inserted, the display shows

a warning message, followed by the confir-

mation screen (where "Sure?" flashes).

With this screen, you can choose whether eras-

ing the recorded data or ejecting the disc.

• To erase the existing (recorded) data

Press the [ENTER/YES] key while both "ERASE" and

"Sure?" are flashing.

The display shows the screen below and the VF-

16 starts erasing the disc.

As the erase process progresses, the number of

flashing "*" increases from left to right.

• To eject the disk

Use the [JOG] dial to highlight "Eject" (flashing)

and press the [ENTER/YES] key.

The disc is ejected while the display shows "Insert

Disk!."

By inserting a disc, you can start the save opera-

tion again from the beginning.

Immediately after completing erasing the disc, the

display shows the same screen (for selecting a pro-

gram to be saved) which appears after step 4 is

performed. Hereafter, perform the same proce-

dure as described above.

<Note>

You cannot abort the save operation before com-

pleted. Especially during the save operation to more

than one disc, if you happen to press the [

EXIT/NO

]

key while removing or inserting a disc, you have to

redo the save operation from the beginning with

the first disc.

Flashing

Increases as the process progresses.

<Note>

If the message above appears while saving data

to a CD-R disc, you can no longer use the disc.

Flashing