Fostex VF-16 <About load error>

5. While the desired backup number/title is shown on the

display, press the [ENTER/YES] key.

The display shows the screen for creating a new program

on the current drive, to which data will be loaded ("New

PGM" lights).

When completing the load operation, "Load Completed!"

appears on the display (as shown below) and the VF-16

stops access to the drive, while the disc in the CD-RW

drive is automatically ejected.

As described earlier, when loading data from a CD-RW

drive, the VF-16 creates a new program on the current

drive, which is the load destination.

Therefore, "New PGM" is shown on the right of the

flashing program number.

The program number for the newly created destination

program is the next number to the highest existing

program number.

For example, if there are 8 existing programs (P01 through

P08) on the current drive, the newly created program is

numbered "P09."

7. Press the [EXIT/NO] key (or the [STOP] key) to exit the

setup mode.

<Note>

If you rotate the [

JOG

] dial while the above screen

Destn PGM Select

") is shown, you can select an exist-

ing program on the current drive as the destination.

However, as mentioned earlier, when loading data

using CD-RW you cannot actually load data to the ex-

isting program by overwriting the program data.

If you press the [

ENTER/YES

] key (see the next step)

while selecting an existing program as the destina-

tion, the display shows "

Void!

" and the VF-16 ignores

the operation.

When you load song data which is saved to

more than one disc, the display also shows the

disc number currently set. The example below

shows DISC-1 is set.

6. While "New PGM" is shown, press the [ENTER/YES] key.

The VF-16 starts the load operation. The recorded space

shown on the display is counted down while the load

operation progresses. It will take some time for loading

all data. The following display example shows that the

data of the backup number "B01" is being loaded to "P08"

which is newly created on the current drive.

<Note>

If there is not enough available space for loading on

the current drive, the display shows "

Disk Full!

" and

the display returns to the previous screen.

<Note>

You cannot abort the load operation before completed.

When loading data from more than one disc, the first

disc will be ejected immediately after all disk data has

been loaded, while "Insert Disk!" appears on the screen.

After inserting the second disc, the VF-16 automatically

resumes the load operation. After completing loading

all the discs, the above screen appears.

<About load error>

If an error occurs for some reason during the load

operation, the error message as below appears.

If it appears, press the [EXIT/NO] key.

The display returns to the previous screen before

performing the load operation.

Note that loaded data before the error message

appears is all invalid.

Flashing

Lighting

Flashing Lighting