Installing SANsurfer FC HBA Manager Initial Installation
S
6.Select an install location using one of the following methods:
NOTE:
For NetWare, select the drive mapped to the NetWare server (always select a location other than the default).
To accept the destination location shown in the dialog box and continue, click Next (recommended).
The default location for a Windows system is:
C:\Program Files\QLogic Corporation\SANsurfer
The default location for a Red Hat/SUSE Linux and Solaris SPARC/x86 system is:
/opt/QLogic_Corporation/SANsurfer
To select a different location:
a.Click Choose, and then select an installation location.
b.On the Choose Install Folder dialog box, click Next.
If you selected a different location and want to reselect the default location:
a.Click Restore Default Folder.
b.Click Next.
If there is a previous version of the SANsurfer tool on the system, the Previous SANsurfer Install Detected message box appears (Figure
