
Getting Started
Refreshing the Host Configuration
S
4.Under Target: Binding Options, select one of the following binding options:
If you want the driver to bind the target ID using the target's WWPN, click Bind by World Wide Port Name.
If you want the driver to bind the target using the target's port ID, click Bind by Port ID. Failover and LUN masking are disabled. If the target port ID changes, this target is considered a
5.Click Save to preserve these adapter driver settings.
Refreshing the Host Configuration
The host configuration (including the FC/CNA HBA tree) shown in the SANsurfer FC HBA Manager interface refreshes automatically based on the polling interval. If you want to refresh the configuration immediately (you changed the configuration, for example), choose one of the following options:
On the toolbar, click the Refresh button.
On the SANsurfer FC HBA Manager main window, open the Host menu, and then click Refresh.
Press F5.