
Getting Started
Setting the Configuration Policies
S
If you select this policy and this type of sharing is detected, a warning appears. Do one of the following:
To disable access to these devices from other hosts that display in the FC/CNA HBA tree, click OK.
To disable this policy for this instance, click Cancel.
To view which devices are being shared with hosts that are conflicting with this policy, click More.
Configure the selected device and display a message if the device is already configured on another host(s).
This policy configures the selected device and shows a message if the device is configured on another host.
If you select this policy and this type of sharing is detected, a warning appears. Do one of the following:
To disable access to these devices from other hosts, click OK.
To disable this policy for this instance, click Cancel.
To view which devices are being shared with hosts that are conflicting with this policy, click More.
Ask these options when a device is configured and sharing is detected.
If you select this policy and sharing is detected, the Shared Device Found dialog box (Figure
Do not configure device.
Configure and disable access from other hosts.
Proceed with device configuration.
To accept your selection, click OK. To not configure the device, click Cancel.
3.LUN sharing checking occurs each time a configuration change is made to a LUN. On the Policy Settings dialog box (Figure
To disable LUN sharing checking, clear the Check for shared (enabled) LUNs among host(s) check box.
To enable device sharing checking, select the Check for shared (enabled) LUNs among host(s) check box, and then select one of the following policies: