A
Getting Started Specifying the Adapter Driver Settings
Figure 5-15 Settings Page (Linux Failover Driver Only)
The identifying information includes:
Hostname is the name or IP address of the host connected to the adapter.
Adapter Model is the QLA2xxx adapter model number.
3.Under Target: Display Options, click one of the following to specify whether only targets configured using SANsurfer FC HBA Manager are seen by the system:
If you want the system to see all targets at all times whether or not the target was configured with SANsurfer FC HBA Manager, click Present targets that are persistently bound plus any new target(s) with driver defaults.
If you want the system to see only targets configured using SANsurfer FC HBA Manager, click Present persistently bound target(s) Only.
(Linux failover driver only) If you want the system to see only targets with driver defaults, click Present target(s) with driver defaults. This option is available only for Linux operating systems.
NOTE:
If you select the Linux option Present target(s) with driver defaults, the system ignores persistent data.
