A
Getting Started SANsurfer FC HBA Manager Main Window
Device Icons and Text
The FC/CNA HBA tree shows the following information about disks, tapes, and SAFTE devices:
Device type: Disk, tape, or SAFTE (used for enclosure information).
Device port ID: Port ID of the disk, tape, or SAFTE device.
Online/Inactive Status: A circled red X on the icon indicates an inactive device (either the device is down, the port on device is down or inactive, or the device is not responding properly to SCSI commands).
Diagnostics enabled/disabled for read/write buffer test: A green check mark on the icon and the text Diag Enabled indicate enabled. For more information, see “Preparing for Diagnostic Testing” on page
Beacon Flashing: Flash Beacon: LED beacon flashing function is enabled (see “Finding a Target” in the help system)
Examples:
Disk
Disk
Tape
Device Icons
The disk icons are: | The tape icons are: |
Disk Online, Diag Enabled | Tape, Diag Enabled |
Disk Online, Diag Disabled | Tape, Diag Disabled |
Disk Inactive, Diag Enabled | Tape Inactive, Diag Enabled |
Disk Inactive, Diag Disabled | Tape Inactive, Diag Disabled |
Offline. Disk on offline host | Offline. Tape on offline host |
The SAFTE device icons are: |
|
SAFTE device |
|
Offline. SAFTE device on offline host |
|
