Q-Logic SN0054651-00 F Setting the Configuration Policies, To set the configuration policies

Getting Started

Setting the Configuration Policies

S

6.In the Email Addresses list, type one or more e-mail addresses to be notified. Enter one e-mail address for each line.

7.Under Notification Options, select the check boxes for the notifications that you want to send:

„Information Alarms

„Unknown Alarms

„Warning Alarms

„Bad Alarms

„Attach Host Configuration (sends the current host configuration)

8.To verify that e-mail notification is operable, click Test. If successful, a message states that the e-mail was sent successfully. Check the e-mail addresses for the e-mail.

9.When you finish making selections, do one of the following:

„To save the changes and close the Email Settings dialog box, click OK.

„To close the Email Settings dialog box without saving any changes, click Cancel.

Setting the Configuration Policies

You can set the policies for sharing devices and LUNs among hosts. A device or LUN is shared when more than one host in the FC/CNA HBA tree has access to the device or LUN. Only hosts that appear in the FC/CNA HBA tree are checked for shared access to a device or LUN.

To set the configuration policies:

1.To access the Policy Settings dialog box, choose one of the following options:

„On the SANsurfer FC HBA Manager main window, open the Settings menu, and then click Policies.

„Press CTRL+SHIFT+P.

The Policy Settings dialog box opens (Figure 5-11).

5-24 SN0054651-00 F