Ricoh AP1400/AP2000 manual NWSetup NetWare and Print Server Configuration Program, How To Install

10.Press the ESC key and save all changes.

11.Press the ESC key until you see the prompt to exit PCONSOLE.

12.Select Yes and then press the ENTER key.

4.6NWSetup: NetWare and Print Server Configuration Program

NWSetup lets you do the entire setup procedure for Novell NetWare and your Network Interface Board using only one program. This program combines the following configuration steps:

ŸLets you set up the Novell file servers and print servers for NetWare printing, instead of using NetWare utilities.

ŸAllows you to set up your print server printers fsor network printing.

4.6.1How To Install

In order to install NWSetup, you must do the following:

1.Place the CD ROM into your CD drive.

2.Click on CD ROM Table of Contents when the menu appears.

Note: If you do not have Acrobat Reader 3.0x or higher installed, then you should click on "Install Acrobat Reader" first.

3.Click on Installation/Configuration Programs.

4.Click on NWSetup Software.

5.Read the information screen. Click where indicated to start the installation.

4.6.2How To Initiate NWSetup

When you install NWSetup, a program icon is placed on your desktop. Click on the NWSetup icon to start the program.

Note: If you are configuring for NDS (Directory Services), make sure you are logged into the correct tree and context before you initiate this program.

4.6.3Using the NWSetup Program

4.6.3.1Select a Print Server

NWSetup displays a list of all Network Interface Boards available on your network after you initiate the program. The Network Interface Board appears with its serial number. See screen example below:

Chapter 4 - 13