Ricoh AP1400/AP2000 manual Tray. ⇒ P.130 Paper Input

Error & Status Messages on the Operation Panel

Messages	Description	Comments
Load Bypass Tray	There is no paper on the by-	Load {paper size} paper in the
{paper size}	pass tray.	specified feed direction onto the
		bypass tray. Printing will not au-
	The actual size of paper
		tomatically resume if the paper
	loaded on the bypass tray
		size and direction setting is incor-
	does not match the size for
		rect. There are 2 methods to re-
	which the page was built.
		sume printing.
		A Use the operation panel to set
		the correct size and direction
		of the paper in the bypass
		tray. ⇒ P.130 “Paper Input 2/
		2”
		B Press {Enter} to have printing
		begin, regardless of the size
		and direction of the paper in
		the bypass tray.
		Note
		❒ When “Auto Select” is speci-
		fied for the paper source using
		the printer driver, this mes-
		sage might appear when there
		is {paper size} paper in a dif-
		ferent feed direction in any of
		the trays.
		❒ The page is printed in the in-
		correct format on the paper
		loaded on the bypass tray in
		the following cases.
		• if you press {Enter} before
		loading the correct paper.
		• if the specified period of
		time has passed with the
		Auto Continue feature on.
		In these cases, you can't
		continue printing due to
		the paper size error. You
		should take one of the fol-
		lowing actions to clear this
		error:
		• Press {Enter}. (Auto
		Continue feature
		doesn't work with this
		error.)
		• Open and close any of
		the trays.

10

99