Ricoh AP1400/AP2000 manual Preparing the Printer Powering Up the Printer, Configuring NetWare

Chapter 1 Introduction		1-1
1.1	What's in Your Package	1-2
1.2	Hardware/NOS Requirements	1-3
1.3	Conventions Used in this Document	1-4

Chapter 2 Preparing for Network Connection		2-1
2.1	Preparing the Printer	2-1
2.2	Powering Up the Printer	2-1

Chapter 3 Using the Management Access Program or a Standard Web

Browser		3-1
3.1	Where to Place the MAP	3-2
3.2	How to Install MAP in	3-2
3.3	Using the MAP Program	3-2
3.4	Configure the MAP Program	3-2
3.5	Web IP Browser	3-3

Chapter 4 NetWare Configuration		4-1
4.1 Configuring NetWare 3.x		4-1
4.1.1	Start PCONSOLE and Select File Server	4-2
4.1.2	Create Print Queues	4-2
4.1.3	Enter the Print Server Name	4-2
4.1.4	Configure the Print Server	4-3
4.1.5	Assign Print Queues to the Printer	4-3
4.1.6	Set Up Notify Options for the Printer (Optional)	4-4
4.1.7	Installing the Print Server on Multiple File Servers	4-4
4.1.8	Primary File Server	4-5
4.1.9	Preferred File Servers	4-5
4.2 Configuring NetWare 4.x Bindery Emulation		4-5
4.2.1	Confirm Bindery Context	4-5
4.2.2	Configure in Bindery Mode with PCONSOLE	4-6

4.3Configuring the Network Interface Board in NetWare Directory Services 4-7

4.3.1 Create Printer Object 4-8