Ricoh AP1400/AP2000 Preferred NDS Tree, Enable Bindery Mode, Primary File Server, Enable Printer

	maximum field length is 128 characters.
	NOTE: Make sure you enter the whole context, whether typed or
	typeless.
Preferred NDS Tree	Enter a text string to set the NDS tree which the
	Network Interface Board will use to login.
	The maximum field length is 48 characters.
Enable Bindery Mode	Determines whether the Network Interface Board should attempt to
	service the NetWare newtork in bindery mode. If this box is
	checked, then Bindery Mode is enabled.
	NOTE: If this field is not enabled, then the Primary File Server field
	will not be enabled.
Primary File Server	Specifies which NetWare file server that the Network Interface
	Board should use as the primary file server.
	If no primary file server has been selected yet, or if a server that is
	not available is selected, then the first file server in the list is
	selected.

4.6.3.3Print Server Settings

NWSetup lets you set up each Print Server printer. This information is usually entered using NetWare’s NWADMIN or PCONSOLE utility. NWSetup eliminates the need for configuring your Network Interface Board printer through any NetWare utility.

The screen on the next page is used to set up a Print Server printer. A description of each field follows the screen example.

Field	Description
Enable Printer	Indicate whether support for the Network Interface Board and
	printer is enabled.
	If this box is checked, then the printer is enabled.

Chapter 4 - 16