Ricoh AP1400/AP2000 manual 120, Turn the printers power switch off

Troubleshooting

E Slide the green lock lever to the right (A), so that the paper feed roller can be released (B).

2	1
	TS3M040E

F Clean the rubber part of the roller with a soft damp cloth. After wip- ing it with a damp cloth, wipe it with a dry cloth to remove the wa- ter.

Important

❒Do not use chemical cleaner or organic solvent such as thinner or benzene.

G While sliding the green lock lever to the right (A), set the paper feed roller to its original position (B).

After that, return the green lock lever to its original position (C).

10
2	1
	3
	TS3M050E

Note

❒Make sure that the green lock le- ver secures the roller correctly by confirming that the roller ro- tates smoothly.

H Move the printer to the place where it was placed. Set the paper tray into the printer while lifting the front side of the tray, then push it in until it stops.

TS3Y100E

I Insert the plug of the power cord into the wall socket securely. Connect all the cables that were removed in step B.

Note

❒Follow the same procedure to clean the paper feed roller of the optional tray unit.

J Turn the printer's power switch on.

Type 2 printer

RCAUTION:

•The paper tray does not have a stopper. When pulling it out, be careful not to pull it strongly. If you do, the tray might fall and cause personal injury.

Note

❒Please refer to the inside of the front cover of this manual to con- firm which printer (Type 1 Printer or Type 2 Printer) you have.

A Turn the printer's power switch off.

120