Ricoh AP1400/AP2000 manual Type 1 Printer Installing Envelope Feeder Type

Installing Options

Type 1 Printer: Installing the

Envelope Feeder Type 2000

Note

❒Please refer to the inside of the front cover of this manual to con-

2	firm which printer (Type 1 Printer
	or Type 2 Printer) you have.

Important

❒This unit is a tray that slides into the optional paper feed unit. With- out the optional paper feed unit, this envelope feeder cannot be used.

❒The Type 1 Printer can have two optional paper feed units installed at a time. However, the envelope feeder should be used in the top- most optional paper feed unit (tray 2). It can not be used in the bottom- most paper feed unit (tray 3).

❒Do not slide more than one paper tray out at a time. Having more than one paper tray filled with pa- per in a fully extended position could cause the machine to tilt to- ward.

A Check the content in the box for the following items.

•Envelope feeder

•Installation Guide

until it stops. After that, lift it slightly, then pull it out.

TS3Y150E

Important

❒The envelope feeder should be used in the top-most optional paper feed unit (tray 2).

Note

❒Keep the paper tray with paper in a cool and dry place.

C While lifting the front side of the envelope feeder, place the feeder into the printer. Then slide it into the printer until it stops.

TS3Y290E

B Pull out the 2nd paper tray (tray 2) of the optional paper feed unit

Type 1 Printer: Installing the Network Interface Board Type 2000

Note

❒When loading envelopes, see P.84 “Type 1 Printer: Loading En- velopes”.

Note

❒Please refer to the inside of the front cover of this manual to con- firm which printer (Type 1 Printer or Type 2 Printer) you have.

16