Ricoh AP1400/AP2000 manual Enable/Disable Network Protocols, PCL, PS, Ascii

<CR> changed to <CR><LF>

PCL, PS, ASCII Any no action

1.To access the LPD Printers menu, type 2 and press the ENTER key. For a unit at factory default, the menu shown below will appear.

The Configuration Utility

Unit Serial no. 991398 v2.1X

LPD Printers

1.Printer 1

2.Banners

Please Enter Selection (? for Help) :

2.To change the set of emulations, type 1 and press the ENTER key. The options shown below will appear.

The Configuration Utility

Unit Serial no. 991398 v2.18

Printer 1 PCL OTHER

1.PCL

2.PS

3.ASCII

4.OTHER

Please Enter Selection (? for Help) :

3.To delete an emulation, select the number opposite the language listed. For example, type 1 and press the ENTER key to delete PCL. Typing 1 again will again select PCL.

4.From the LPD Printers menu, press 2 to toggle Banners between Enabled/Disabled.

7.5.4Enable/Disable Network Protocols

To enable network protocols, at the Main menu type 3 and press the ENTER key.

You are given the choice of disabling either NetWare or AppleTalk since both network OS’s are enabled by default. For example, to disable Appletalk, type 2 and press the ENTER key.

Chapter 7 - 19