Ricoh AP1400/AP2000 manual Select Printer Languages, Print Server Setup Job Detected to be Action

2.Type 1 again and press the ENTER key. The IP Address submenu will appear:

The Configuration Utility

Unit Serial no. 991398 v2.18

IP Parameters

1.IP Address

2.Subnet Mask

3.Default Gateway

4.Base Port Number

Please Enter Selection (? for Help) :

3.Enter a new IP Address and press the ENTER key. Repeat the previous steps to change Subnet Mask and Default Gateways.

4.Enter 4 to change the base port number.

Note: The base port number is one less than the actual TCP/IP port number used by the printer. For example, to set the port number to 9100, enter 9099. You should specify a port number between 1000 and 65530 for compatibility with HTML-based configuration capability, which can be accessed via the MAP or a standard Web Browser.

7.5.3Select Printer Languages

Selection 2 in the Main Menu allows you to designate which emulations (printer interpreter languages) the printer supports. This is to allow the resident lpd/lpr to modify files intended for other emulations so that they may be printed. The menu also allows you to enable or disable banners attached to lpd/lpr handled jobs.

The emulation choices are Printer Control Language (PCL), PostScript (PS), ASCII (simple text) and Other (any print job not recognized as PCL, PS, or ASCII). The file modifications and conditions are:

Print Server Setup	Job Detected to be	Action
PCL, (PostScript)	ASCII	<CR> changed to
		<CR><LF>
PostScript	PCL, Other	PostScript header added
not PostScript	PostScript	Job discarded
PostScript	ASCII	PostScript header added,

Chapter 7 - 18