Ricoh AP1400/AP2000 manual Clearing the Maintenance Condition

Clearing the Maintenance Condition

Clearing the Maintenance Condition

After replacing all of the parts, follow the steps below to clear the “Replace Maintenance Kit” message on the panel display.

A Make sure the following message appears on the panel display.

Replace

Maintenance Kit

B Press {Menu}.

The following message appears on the panel display.

Main Menu: j

Job Control l

C Press {U}{T} until the following message appears on the panel dis- play.

Main Menu: j

Maintenance l

D Press {Enter}.

The following message appears on the panel display.

PM Clear:	j
Yes=#	l
		2

G Press {Enter} to clear the mainte- nance condition. Wait for a while.

The following message appears on the panel display after about three seconds.

Maintenance:	j
4.PM Clear	l

H Press {On Line}.

The following message appears on the panel display.

Ready

The following message appears on the panel display.

Maintenance: j 1.System Reset l

E Press {T} until the following message appears on the panel dis- play.

	Maintenance:	j
	4.PM Clear	l
F Press {Enter}.

13