9. Paper and Other Media

Paper and Other Media Supported by Your Printer

Paper Types and Sizes

This section provides the type, size, feed direction, and maximum capacity of paper that can be loaded into each paper tray in this printer.

Important

If you use damp or curled paper, a misfeed might occur. In such a case, try turning over the paper stack in the paper tray. If there is no improvement, change to paper with less curl.

Note

The meaning of the symbols describing paper can be seen in the table below.

In this manual

On the panel display

Meaning

 

 

 

K

mn

short-edge feed direction

 

 

 

L

op

long-edge feed direction

 

 

 

It is recommended that you load paper having the size and direction you fre- quently use in the tray selected with the “Tray Priority”. For details on Tray Priority, see P.128 “Job Control Parameters”.

When loading paper having the same size in more than one tray, it is recom- mended that you load paper in the same direction.

Reference

For details on loading each type of paper, see P.79 “Type 1 Printer: Loading Pa-

per and Other Media”, and P.88 “Type 2 Printer: Loading Paper and Other Media”.

Type 1 Printer

Note

Please refer to the inside of the front cover of this manual to confirm which printer (Type 1 Printer or Type 2 Printer) you have.

Important

Be sure to set the paper size dial to match the actual paper size loaded in the tray. When the actual paper size is not shown on the dial, set the dial to “p” and specify the paper size using the operation panel.

65

Page 85
Image 85
Ricoh AP1400/AP2000 manual Paper and Other Media Supported by Your Printer, Paper Types and Sizes, Type 1 Printer