Ricoh AP1400/AP2000 manual Chapter NetWare Configuration, Configuring NetWare

Chapter 4

NetWare Configuration

Use this chapter if you will be printing from a Novell NetWare NOS. This chapter is divided into the following sections:

ŸConfiguring NetWare 3.x describes how to configure the Network Interface Board for use with Version 3.x.

Use PCONSOLE to set up the print server function.

ŸConfiguring NetWare 4.x in Bindery Emulation describes how to configure the Network Interface Board for use with Version 4.x Bindery Services.

Use PCONSOLE to set up the print server function.

ŸConfiguring NetWare Directory Services describes how to configure the Network Interface Board for use with Version 4.x Directory Services.

Use NetWare Administrator or PCONSOLE to set up the print server function.

ŸNetwork Interface Board Setup Parameters describes the parameters accessible via MAP or an IP Browser used to configure the Print Server for NetWare.

ŸUsing NetWare Utilities explains how to use standard Novell NetWare utilities to make changes to the configuration of the Print Server function.

ŸNWSetup: NetWare and Print Server Configuration Program describes how to install the program and how to configure the Network Interface Board and NetWare file servers without using Novell NetWare utilities.

4.1Configuring NetWare 3.x

Before configuring NetWare, you must determine if the Network Interface Board has its desired name. If you change the name, use MAP or an IP Browser to change the name.

The following steps are the general procedure for configuring the Network Interface Board. You must have supervisor privileges to do this configuration. These steps are covered in detail in the following paragraphs:

1.Start PCONSOLE and select the file server you want to use.

2.Create the print queues.

3.Specify the <print server> card as a print server.

4.Configure the print server and printer.

5.Assign the print queues.

6.Set up the NOTIFY options.

7.Repeat the procedure for other file servers.

When you are finished, turn the printer off and on again. The printer creates a status report that indicates the file servers to which the unit is attached and the queues which it services.

Chapter 4 - 1