Ricoh AP1400/AP2000 manual 109, Tings with the Operation Panel

	Other Printing Problems
Status	Possible Causes, Descriptions, and Solutions
It takes too much time to re-	The data is so large or complex that it takes time to pro-
sume printing.	cess it. If the Data In indicator is blinking, the data pro-
	cessing is being done. Just wait until it resumes.
	Energy Saver mode might be enabled. In Energy Saver
	mode, it takes time for the machine to warm up.
Image is printed in the	Specify the correct orientation under the “PCL Menu”
wrong orientation.	with the operation panel. ⇒ P.125 “Making Printer Set-
	tings with the Operation Panel”
Part of the image cannot be	A paper size which is smaller than those specified in
printed.	the application is used for printing. Load the correct
	size of paper. If you can't select the paper size specified
	in the application, make use of the zooming features.
Network configurations you	Turn the printer's power switch off and on. The config-
have made do not become ef-	uration sheet of the network interface board will be
fective.	printed automatically. Check the configuration of the
	network interface board with this sheet.

Note

❒If the problem cannot be solved, contact your sales or service representative.

10

109