Ricoh AP1400/AP2000 manual Replacing the Paper Feed Rollers

Replacing the Paper Feed Rollers

Replacing the Paper Feed Rollers

RCAUTION:

•When lifting the machine, use the inset grips on both sides of the machine. Otherwise, the ma- chine might fall and cause per- sonal injury.

A Move the printer to the edge of a sturdy and stable table or desk.

TS3M130E

Important

❒Do not put the printer on an un- stable or tilted surface.

Note

❒If the optional paper feed unit is equipped with your printer, do not move the printer and the unit together as they are not se- curely attached.

B When looking inside where the paper tray was installed, you can see the paper feed roller. Slide the green lock lever to the right (A),

so that the paper feed roller will be released (B).

1

2

2

TS3M140E

C Set the new paper feed roller. While sliding the green lock lever to the right (A), set the new roller (B). After that, return the green lock lever to its original position (C).

1

2

3

TS3M150E

Note

❒Confirm that the green lock le- ver secures the roller correctly by checking if the new roller ro- tates smoothly.

D If your printer is equipped with the optional paper feed unit(s), follow the same procedure to re- place the paper feed roller of the optional paper feed unit(s).

E Leave the paper tray pulled out and go to P.8 “Replacing the Transfer Roller”.

7