Replacing Parts

Replacing the Transfer Roller

A Open the front cover by pulling

the front cover release buttons.

2

TS4M160E

B Open the transfer roller cover.

TS4M170J

C Wear the gloves included in the maintenance kit to avoid making your hands dirty with toner on the transfer roller.

D Hold the both sides of the roller (green parts), and remove the roll-

er from the printer as shown in the illustration.

TS4M180J

E Insert the new transfer roller. When placing it, the green gear of the roller should be positioned on the left (A) as shown in the illus- tration.

F Close the transfer roller cover.

G Take gloves off. Leave the paper tray pulled out and the front cover opened, go to P.11 “Replacing the Fusing Unit”.

10

Page 209
Image 209
Ricoh AP1400/AP2000 manual TS4M160E