Troubleshooting

 

 

Possible Cause

Solutions

 

 

 

 

 

 

Is the Data In indicator

If not, the data is not being sent to the printer.

 

 

blinking or lit after start-

If your printer is connected to the computer using the in-

 

 

ing the print job?

 

 

 

terface cable

 

 

 

Check if the printer port settings are correct. For a paral-

 

 

 

lel port connection, port LPT1 or LPT2 should be set.

 

 

 

Windows 95/98

 

 

 

 

A Click [Start], point to [Settings], and then click

 

 

 

 

[Printers].

 

 

 

 

B Select the icon of the printer by clicking it. Next, on

 

 

 

 

the [File] menu, click [Properties].

 

 

 

 

C Click [Details] tab.

 

 

 

 

D Check the [Print to the following port] box to make

 

 

 

 

sure the correct port is selected.

 

 

 

Windows 3.1x

 

 

 

 

A On the [Control Panel], double-click [Printers] icon.

 

 

 

 

B Confirm that this printer is specified as the default

 

 

 

 

printer.

 

 

 

 

C Click [Connect].

 

 

 

 

D Check the [Ports] box to make sure the correct port

 

 

 

 

is selected.

 

 

 

Windows NT4.0

 

 

 

 

A Click [Start], point to [Settings], and then click

 

 

 

 

[Printers].

 

 

 

 

B Select the icon of the printer by clicking it. Next, on

 

 

 

 

the [File] menu, click [Properties].

 

 

 

 

C Click [Port] tab.

 

 

 

 

D Check the [Print to the following port] box to make

 

 

 

 

sure the correct port is selected.

10

 

 

 

 

 

Network Connection

 

 

 

 

 

 

Contact your network administrator.

 

 

 

 

 

Note

If you cannot solve the problem by taking the above actions, contact your sales or service representative.

106

Page 126
Image 126
Ricoh AP1400/AP2000 manual Terface cable, Network Connection, 106, Check the Print to the following port box to make