Ricoh AP1400/AP2000 manual 101, Paper Input 2/2

	Error & Status Messages on the Operation Panel
Messages	Description	Comments
Load Tray XX	The tray XX is empty.	Load {paper size} paper in the
{paper size}		specified feed direction into tray
	The actual size of paper
		XX. Printing will not automati-
	loaded in the tray XX does
		cally resume if the paper size and
	not match the size for which
	the page was built.	direction setting is incorrect.
		There are 2 methods to resume
		printing.
		A Use the operation panel to set
		the correct size and direction
		of the paper in the tray XX. ⇒
		P.130 “Paper Input 2/2”
		B Press {Enter} to have printing
		begin, regardless of the size
		and direction of the paper in
		the tray XX. .
		Note
		❒ When “Auto Select” is speci-
		fied for the paper source us-
		ing the printer driver, this
		message might appear when
		there is {paper size} paper in a
		different direction in any of
		the trays.
		❒ The page is printed in the in-
		correct format on the paper
		loaded in the tray XX in the
		following cases.
		• if you press {Enter} with-
		out loading the correct pa-
		per.
		• if the specified period of
		time has passed with Auto
		Continue feature on. In
		these cases, you can't con-
		tinue printing due to the
		paper size error. You
		should take one of the fol-
		lowing actions to clear this
		error:
		• Press {Enter}. (Auto
		Continue feature
		doesn't work with this
		error.)
		• Open and close any of
		the trays.

10

101