Ricoh AP1400/AP2000 manual Type 2 Printer Installing the Network Interface Board Type

Installing Options

Note • Additional Documentation

❒Keep the paper tray with paper in a cool and dry place.

	C While lifting the front side of the
	envelope feeder, place the feeder
	into the printer. Then slide it into
2	the printer until it stops.

TS4Y290E

Note

❒When loading envelopes, see P.92 “Type 2 Printer: Loading En- velopes”.

Type 2 Printer: Installing the Network Interface Board Type 2000

Note

❒Please refer to the inside of the front cover of this manual to con- firm which printer (Type 1 Printer or Type 2 Printer) you have.

❒Use the shielded twisted-pair (STP) network interface cable.

A Check the contents in the box for the following items.

•Network interface board

•CD-ROM

•Ferrite Core

•Installation Guide

•Quick Configuration Guide

B Be sure to check the following points:

•The printer's power switch is turned off.

•The power cord is unplugged from the wall outlet.

C Remove the back plate.

TS4P030E

Note

❒A coin can be used to remove the screws.

D Align the screw holes of the net- work interface board over the screw holes where the back plate used to be. Make sure that the board is aligned so that the jack is facing out and is on the bottom. Press the board firmly against the printer. The interface connectors on the printer and the board should align and offer a slight re-

22