Ricoh AP1400/AP2000 manual Print Server Name, Print Queue Scan Rate, Ethernet Frame Type

NetWare® Configuration

A Double-click on the target NIB.

The first “Print Server Settings” screen appears.

Most of the fields will be configured automatically.

Fill in the following fields with the appropriate information.

❖Print Server Name

	The name that the NIB uses to log into NetWare.
2

❖Print Queue Scan Rate

The number of seconds the NIB waits before polling print queues for a new print job.

❖Ethernet Frame Type

Sets the default frame type that is used by the NetWare protocol stack.

❖Print Server Password

Asterisks in this field indicate that a password is needed to log into Net- Ware and the Network Interface Board.

❖Change Password

Clicking on this button brings up a dialog box allowing you to set or change the password.

B Click on [Next] to continue.

The second “Print Server Settings” screen appears.

Again, most of the fields will be configured automatically.

Fill in the following fields with the appropriate information.

❖Enable NDS Mode

Indicates whether or not the NIB supports Directory Services.

❖Preferred NDS Context

The NDS directory context which the NIB uses to login to the network.

❖Preferred NDS Tree

The NDS tree which the NIB uses to login to the network.

❖Enable Bindery Mode

Determines whether the NIB services the network in Bindery mode.

Note

❒If this field is not enabled, then the Primary Server field will not be en- abled.

❖Primary File Server

Specifies the file server that the NIB uses as the primary file server.

8