Setting Up LPR Printing

Setting Up LPR Printing

If the printer driver has not already been installed, please install it before con- tinuing.

In the following instructions, some field or dialog names may vary depending on the NT release pack in use.

Windows NT4.0

A Click on the Windows Start Button and select Settings, and the Printers. B Right click on the appropriate printer and select Properties.

C On the Ports tab, click on Add Port.

D Double click on LPR Port in the list of available printer ports.5

E In the Name or address of host providing lpd: field, enter the IP address of the NIB (that was assigned with BOOTPL32).

F In the Name of printer or print queue on that server: field, enter PORT1 and click on [OK].

G Click on Close to close the Printer Ports dialog.

The NIB IP address is now displayed and currently selected on the list of ports.

H If the printer is to be shared, click on the Sharing tab, select Shared and en- ter the Share name.

I Click on [OK] when finished.

29

Page 325
Image 325
Ricoh AP1400/AP2000 manual Setting Up LPR Printing, Windows NT4.0