Ricoh AP1400/AP2000 manual Macintosh Installing the PPD File, Click Device Settings tab

Installing the PostScript Printer Driver

C On the [File] menu, click [Properties].

The Printer Properties appears.

D Click [Device Settings] tab.

E Under [Installable Options], select the option you have installed to your print- er.

The current setting is displayed in the [Change Setting] box in the lower part of the tab.

F Use the [Change Setting] list to select the appropriate setting for the selected option.

G Repeat steps E– F for all options.

H After making all settings for options, click [OK].

Macintosh - Installing the PPD File

You can use the LaserWriter printer driver that comes with your Macintosh

6 when printing from a Macintosh. However, if you use the LaserWriter driver alone, you cannot use the printer specific functions. The printer specific func- tions can be used by installing the PPD file.

Note

❒The LaserWriter printer driver for Macintosh does not come with this printer. Use the appropriate printer driver that comes with the Macintosh you are us- ing.

❒See the documentation that comes with your operating system for details on the functions of the LaserWriter 8 printer driver.

Installing the PPD File

A Start up your Macintosh.

B Double-click the icon of your Macintosh hard disk to open it.

C Open the [Extensions] folder inside the [System Folder] by double-clicking it.

D Insert the CD-ROM that comes with the printer into the CD-ROM drive of your Macintosh.

The icon of the CD-ROM appears.

E Double-click the CD-ROM icon.

The contents of the CD-ROM are displayed.

44