Ricoh AP1400/AP2000 manual Cleaning the Printer, Cleaning the Friction Pad, 117

Cleaning the Printer

Cleaning the Printer

Cleaning the Friction Pad

If the friction pad becomes dirty, mis- feeds or multi-feeds of paper might occur. In this case, clean the pad as follows:

Type 1 printer

Note

❒Please refer to the inside of the front cover of this manual to con- firm which printer (Type 1 Printer or Type 2 Printer) you have.

A Pull the paper tray until it stops. After that, lift it slightly, then pull it out of the printer.

TS3Y270E

Note

❒Do not touch the three white pins on the right front side of the printer.

B Place the tray on a flat surface. Re- move paper from the paper tray.

C Clean the friction pad (gray or brown part) with a soft damp cloth. After wiping it with a damp

cloth, wipe it with a dry cloth to remove the water.

TS3Y280E

Important

❒Do not use chemical cleaner or organic solvent such as thinner or benzene.

D Load paper with the print side up into the paper tray. While lifting the front side of the tray, insert the paper tray into the printer. Then push it until it stops.

10

TS3Y100E

Note

❒If misfeeds or multi-feeds of pa- per occur after cleaning the fric- tion pad, contact your sales or service representative.

❒Follow the same procedure to clean the friction pad of the op- tional tray and the envelope feeder.

117