Ricoh AP1400/AP2000 manual TS4Y160E

Type 2 Printer: Loading Paper and Other Media

❒Make sure that the setting of the paper size dial matches the paper size and feed direction in the tray. Otherwise, the printer might be damaged, or printing problems might occur.

Reference

For more information on the size and feed direction of paper that can be loaded in the tray, see P.65 “Paper and Other Media Supported by Your Printer”.

A Pull the paper tray out until it stops. After that, lift it slightly, then pull it out of the printer.

TS4Y150E

Note

❒Do not touch the three white pins on the right front side of the printer.

B Adjust the paper size dial to match the size and feed direction of paper in the paper tray.

TS4Y160E

C Adjust the rear and left side guides to the paper size you want to load.

TS4Y170E

D Load paper into the paper tray with the print side up.

TS4Y180E

Important

❒Make sure the top of the stack is

not higher than the limit mark	9
inside the tray.

❒Make sure the paper fits under the rear guide.

E While lifting the front side of the tray, place the tray into the print-

91