Type 1 Printer: Loading Paper and Other Media

Type 1 Printer: Loading Paper and Other Media

Type 1 Printer: Loading Paper in the Standard Paper Tray

Note

Please refer to the inside of the front cover of this manual to con- firm which printer (Type 1 Printer or Type 2 Printer) you have.

Important

Make sure that the setting of the paper size dial matches the paper size and feed direction of the paper in the tray. Otherwise, the printer might be damaged, or printing problems might occur.

Reference

For more information on the size and feed direction of paper that can be loaded in the tray, see P.65 “Paper Types and Sizes”.

A Pull the paper tray out until it stops. After that, lift it slightly, then pull it out of the printer.

TS3Y030E

B If you load the paper of A4 K, 81/ 2× 11” K or larger, you should extend the tray as follows.

Note

You cannot load paper smaller than A4 K or 81/2” × 11” K, if the tray is extended. In this case, return the tray to its standard length.

A Slide the catches inwards to unlock the re-size tray.

TS3Y040E

B Pull the re-size tray until it stops.

9

TS3Y050E

Note

Do not touch the three white pins on the right front side of the printer.

79

Page 99
Image 99
Ricoh AP1400/AP2000 Type 1 Printer Loading Paper and Other Media, Slide the catches inwards to unlock the re-size tray