Philips SE6581B/17 Change Flash time, Change the Dial Mode, Advanced Set, and press o Select

•A validation tone is emitted and the screen returns to the Advanced Set menu.

Note

If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after t is pressed.

For numbers starting with *, # or P, the prefix number will not be added to the predial number after t is pressed.

13.11 Change Flash time

Flash time is the time delay by which the line will be disconnected after you press the t key. It can be set to short or long.

The default value is Long.

1Press m in idle mode, scroll n to Advanced Set, and press o

Select.

2Scroll n to Flash Time and press o Select.

3Scroll n to Short or Long and press o Select to confirm.

•A validation tone is emitted and the screen returns to the Advanced Set menu.

Note

The use of your SE658 cannot be guaranteed on all PABX.

13.12 Change the Dial Mode

The default value for dial mode that is preset in your handset should be the best suited for your subscribed network and

therefore you should not need to change it.

1Press m in idle mode, scroll n to

Advanced Set, and press o Select.

2Scroll n to Dial Mode and press

oSelect.

3Scroll n to Tone or Pulse and press o Select to confirm.

•A validation tone is emitted and the screen returns to the Advanced Set menu.

13.13 Set First Ring Detection

First ring detection allows the phone to ring upon reception of the first ring signal. It is recommended that you set first ring detection Off if you subscribe to caller line identification service. (When using personalized phonebook melodies, this will prevent a normal ring tone from sounding before a melody starts playing.) If you do not subscribe to caller line identification service, it is recommended that you set first ring detection On. (See Section 10.4.)

1Press m in idle mode, scroll n to Advanced Set, and press o

Select.

2Scroll n to First Ring and press

oSelect.

3Scroll n to On or Off and press o Select to confirm.

•A validation tone is emitted and the screen returns to the Advanced Set menu.

Advanced settings 55