Scroll n to Change PIN and press o Select

1Press m in idle mode, scroll n to

Advanced Set and press o Select.

2Scroll n to XHD Sound and press o Select.

3Scroll n to select On or Off and press o Select to confirm.

•A validation tone is emitted and the screen returns to the Advanced Set menu.

13.5Change PIN

The PIN is used for setting call barring numbers and registration/unregistration of handsets. The default PIN number is 0000. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever the PIN is required.

Note

The default PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.

1Press m in idle mode, scroll n to Advanced Set and press o

Select.

2Scroll n to Change PIN and press o Select.

3Old PIN: will be displayed. Enter the current PIN and press o OK.

•The PIN entered will be shown as asterisks (*) on the screen.

•If you enter an incorrect PIN number, an error tone will sound and “Wrong PIN!” will be displayed. Then, you will be

prompted to enter the current PIN again.

4New PIN: will be displayed. Enter the new PIN and press o OK.

5Confirm PIN: will be displayed.

Enter the new PIN again and press o OK to confirm PIN change.

•A validation tone is emitted, Saved! is displayed and the screen returns to the Advanced Set menu.

Tip

If you forget your PIN, you will need to reset your phone to its default settings. For more details, see section 13.8 - “Reset Unit.”

13.6Registration

If you wish to register an additional handset or if you have inadvertently unregistered your phone’s handset and want to re-register it, follow the procedure described below. This is the procedure for registering SE65 handsets. Procedures may vary for other types of handsets. In this case, please refer to the manufacturer of the handset. Additional handsets must be registered to the base station before you can use them. Up to 8 handsets can be registered to one base station.The PIN is required before you can register or unregister handsets.