Philips SE6581B/17 manual Connection Handset does not switch on, Handset does not charge

Weight and dimensions

Base:

•392 grams

•64.5mm × 123.5mm × 199.5mm (H × D × W)

Handset:

•128.5 grams

•160mm × 28mm × 46mm (H × D × W)

Temperature range

•Operation: Between 0 and 35ºC (32 to 95ºF).

•Storage: Between -20 and 70ºC (-4 to 158ºF).

Relative humidity

•Operation: Up to 95% at 40°C

•Storage: Up to 95% at 40°C

17Frequently asked questions

www.philips.com/support

In this chapter, you will find the most frequently asked questions and answers about your phone.

17.1Connection

The handset does not switch on!

•Charge the batteries: Put the handset on the base station to charge. After a

few moments, the phone will switch on.

•You may have accidentally switched off

the handset. In this case, press and hold h for at least 1 second to

switch it on again (see section 9.1 - “Switch the handset off/on”).

The handset does not charge!

• Check charger connections.

icon is not blinking during charge!

•Battery is full: There is no need to charge the battery.

•Bad battery contact: Adjust the handset slightly.

•Dirty contact: Clean the batteries contact with a cloth moistened with alcohol.

Communication is lost during a call!

•Charge the battery

•Move closer to the base station.

The phone is “Out of range”!

• Move closer to the base station.

17.2Set-up

Searching... is displayed on handset

and icon is blinking!

•Move closer to the base station.

•Make sure that your base station is on.

•Reset your unit and restart handset registration.

68 Frequently asked questions