Locate Handset, Set Date and Time | Philips SE6581B/17 specification

2Scroll n to the number of the unit

you wish to establish the conference call with and press o Select.

3Press t on the called handset or l on the base to answer the internal call, where both internal

callers can talk.

• Intercom is established.

4Press c Conf. or long press i on the first unit to start the three- party conference.

•Conference will be displayed on the screen once the conference call is established.

9.8Locate Handset

This feature enables you to locate a missing handset if the handset is in range and contains charged batteries.

1Press a on the base station.

•All the registered handsets start to ring.

•Once a handset is found, press c Silent on a handset to stop

its ringing.

2Press a again to end the paging.

Note

If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode.

9.9Clock and Alarm settings This feature allows you to set the date,

time and alarm settings for your phone.

Note

The alarm feature is available only on the handset.

The procedures in this section refer you to the Clock & Alarm menu. However if you access this menu from the base station, the menu name is “Clock”.

9.9.1 Set Date and Time

1Press m in idle mode, scroll n to

Clock & Alarm (Clock on the base), and press o Select.

2Set Date/Time is highlighted.

Press o Select.

3The last stored date and time are displayed. Enter the current time

and current date (HH:MM DD/MM/ YY). Press u to move the cursor left, or press d to move it right.

If using the 12 hour format, just after setting the minutes, use *

to switch between AM and PM.

4Press o OK.

•A validation tone is emitted and the screen returns to the idle mode.

Note

You can change the format as shown in the next section.

9.9.2 Set Time and Date Format

9.9.2.1Set Time Format

1Press m in idle mode, scroll n to Clock & Alarm (Clock on the

base), and press o Select.

2Scroll n to Set Format and press o Select.

40	Use more of your phone

Image 42

Philips SE6581B/17 manual Locate Handset, Set Date and Time, Clock & Alarm Clock on the base, and press o Select

Contents

SE658 US-EN Telephone Answering Machine Page Table of contents Personal settings Using your PhonebookUsing the Call log Use more Your phone Telephone answering Advanced settingsNetwork Service Machine TAM Remote Access Set the Answer mode Answering Machine SettingsRing Delay Handset Screening Setting the Outgoing Important Safety Instructions Read and understand all instructions Damage to the product Environment and safety Environment and safetyBattery requirements Telephone connection Following a power cut, the call in progress is lost PrecautionsEnvironmental care Equipment Approval Information Notification to the Local Telephone CompanyRights of the Phone Company Environment and safety Hearing Aid Compatibility FCC RF Radiation Exposure Statement Power requirements Rbrc seal Electric, Magnetic and Electromagnetic Fields EMFRbrc seal Service Centers US service center Rbrc seal Your phone Power supplyGuarantee Congratulations on your purchase and welcome to Philips Select key o Overview of your handset Event LEDEarpiece Display Back/Clear key c Mute key s Headset jack Battery doorNumber keys Call transfer key & Intercom key Display icons and Messages BackClear Overview of the base station Top Menu mode Scroll up in the list. G Back/Clear Key cVolume Keys + Handset locator key a Locate handset Flash/Call waiting t Speaker key lHold/Intercom key Main display area Getting started Attach the bracket to the base station as shown below Getting started Install your phone Install batteryCharge battery Install optional headset Power upTip Using multipacks Handset screen Menu Name Handset menu structureSE658 has six menus as shown in the following table Phonebook Enter name Clock and Alarm Advanced Settings Handset only Enter PIN Network Services Handset only Answer Machine Using your phone Enter a Dialing Pause Call using Direct Access MemoryWhile on the phone, press o Option and then o Select to Answer a call Save a redial number into the phonebook Using the Redial listAccess Redial list Delete a redial number Scroll n to Delete and press o Select Use more of your phone Available Press i in idle mode Activate/Deactivate handset Loudspeaker mode DangerUsing the Intercom Chain dialing Transfer an external call to another unit Answer an external call during intercom Clock & Alarm Clock on the base, and press o Select Locate HandsetSet Date and Time Set Alarm Tone Handset only 24Hours Store a contact Phonebook Access phonebookModify a phonebook entry 1 Press m in idle mode To view the details, press o View Tip Using your Phonebook Delete a phonebook entry 1 Press m in idle modeDelete all phonebook entries 1 Press m in idle mode Select phonebook melody Handset only 10.7.1 Add/Edit Direct Access Memory Direct Access MemoryYour voice mail access numbers using key 1 or key Delete Direct Access Memory Using the Call log Using the Call logAccess the Call log Press u in idle mode, and scroll n to browse the call log Delete a call list entry Save call list entry into the phonebookTo select an entry and press o Menu Menu Scroll n to Delete and press o Select Change the Handset Name Handset only Personal settingsTo adjust ring volume on the handset Select Handset Name is highlighted. Press o Select Activate/Deactivate Key Beep Personal Set menuSelect the Display Wallpaper Handset only Display will change as you scroll Press o Select to confirm Select the Color Theme Handset onlyScroll n to Color Theme and press o Select Scroll n to Backlight Time and press o Select Advanced Set and press o Select Advanced settingsEasy Call Set Easy Call number Set Call Barring Mode Advanced settingsScroll n to Conference and press Prompted to enter the current PIN again By default, the PIN isScroll n to Change PIN and press o Select Confirm PIN will be displayed Manual registration Reset UnitEasy registration Unregister Scroll n to Auto Prefix and press Scroll n to Reset and press oSet Area Code Press o OK to confirm Prefix is displayed on the screen Change the Dial Mode Change Flash timeAdvanced Set, and press o Select Network Service Default Settings Parameter Default ValueParameter Default Value Network Service Call ForwardChange Call Forward Activation Codes Call Forward screen Call Forward when BusyNetw. Services, and press o Select Select Scroll n to Call Fwd Busy and press o Select Call Fwd Busy screen Call Forward when UnansweredChange Call Forward when Unanswered Activation Codes Unans, scroll to Deactivate and press o Select Select Scroll n to Call Fwd Unans and press o Select Change Call Forward when Unanswered Deactivation CodeAccess Voice Mail Voice Mail Access the Call Return Service Access Info ServiceSelect Scroll n to Settings and press o Select Set Call Return Service Number Set the Cancel Call Back Number Call the Cancel Call Back NumberSelect Scroll n to Cancel Call BK and press o Select Withhold ID Playing Messages Telephone answering machine TAMOff via your handset see section Telephone answering machine TAM Functions available during playback Unplayed messages will not be deletedPlay, Record, or Delete an Outgoing Message Answering Machine Settings Ring Delay Set the Answer modePress o Select Scroll n to Answer Mode and press o Select Machine menu Remote Access Activate/Deactivate Remote AccessKey Action Handset Screening Technical dataTechnical data Screening and press o Select Icon is not blinking during charge Connection Handset does not switch onHandset does not charge Communication is lost during a call Caller does not hear me Cannot change the settings of my voice mailSound Handset does not ring Product behaviour Keypad does not work Answering machine does not record calls My handset keeps going into idle modePIN code is wrong Unable to perform remote operation Index Mode Overview of the base station Overview of your handsetHandset Menu structure Message Handset name Transfer an external call