Ricoh AP1400/AP2000 manual 122, Paper tray into the printer until it stops

Troubleshooting

10

paper tray into the printer until it stops.

TS4Y100E

I Insert the plug of the power cord into the wall socket securely. Connect all of cables that were re- moved in step B.

Note

❒Follow the same procedure to clean the paper feed roller of the optional tray unit.

J Turn the printer's power switch on.

Cleaning the Registration Roller (Type 1 Printer only)

If the registration roller becomes dirty, misfeeds might occur. In this case, clean the roller as follows:

RWARNING:

•Make sure to turn off the print- er's power switch and wait for about 30 minutes before clean- ing the registration roller. Not waiting for the printer to cool down can result in a burn.

RCAUTION:

•The inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot surface”. Otherwise, it could cause a burn.

Note

❒Please refer to the inside of the front cover of this manual to con- firm which printer (Type 1 Printer or Type 2 Printer) you have.

A Turn the printer's power switch off.

B Open the front cover by pulling

the front cover release buttons.

TS3H060E

C Clean the three rubber parts of the rollers with a soft damp cloth. After wiping them with a damp cloth, wipe them with a dry cloth to remove the water.

TS3H090E

Important

❒Do not use chemical cleaner or organic solvent such as thinner or benzene.

122