Ricoh AP1400/AP2000 manual Add a New User or Group, Connection, Users/Groups

2

NetWare® Configuration

E In the Add Queue to Printer screen in the Queue field you can see the queue that you just created.

F Select the new queue and click on [OK].

The queue is added and you return to the Port 1 screen.

Add a New User or Group

Most of the fields will be configured automatically.

Fill in the following fields with the appropriate information.

⇒Refer to online help for additional information about the fields on this screen.

A In the Port 1 screen, click on [Add User].

The “Add User/Groups” screen appears.

❖Connection

This lists all of the file servers that you can connect to. Select the appropriate connection.

❖NDS Context

Specifies the NDS context to use when generating a list of users.

❖Users/Groups

Lists the users and groups available on the currently selected connection. Select the user/group that you want to add.

❖Delay in seconds for first message

Indicates how long the NIB should wait before sending a notification mes- sage that an error condition has been detected.

❖Delay in seconds for repeat messages

Indicates how long the NIB should wait before sending a repeat notifica- tion of an error condition.

Note

❒The NIB supports notify function only in Bindery Mode.

B Click on [OK] to apply the settings.

Return to the Port 1 screen.

The users/groups that you selected will be visible in the Users/Groups No- tified by Printer field.

Configure the Notify Settings

Most of the fields will be configured automatically.

Fill in the following fields with the appropriate information.

10